11125 I-10 East
Orange, TX 77630
1-800-351-0026

409-745-2002
fax: 409-745-4277
Se Habla Español

An ISO 9001 Certified Company

ABS (Acrylonitrile-Butadiene-Styrene)

ABS is a copolymer of Acrylonitrile, Butadiene, and Styrene. ABS plastics generally possess medium strength and performance and medium cost; ABS is often used as the cost and performance dividing line between standard plastics (PVC, polyethylene, polystyrene, etc.) and engineering plastics (acrylic, nylon, acetal, etc.). ABS polymers can be given a range of properties, depending on the ratio of the monomeric constituents and the molecular level connectivity. It is tough, hard and rigid and has good chemical resistance and dimensional stability. It also is creep resistant, inexpensive, electroplatable, has moderate strength, and has a tendency to stress crack.

Typical Applications:
ABS Properties
Property ASTM or UL Test ABS
Water Absorption (24hrs) (%) D-570 -
Density (lb/in³) D-792 0.038
(g/cm³) 1.04
IZOD Notched Impact (ft-lb/in) D-256 7.0
Tensile Strength (psi) D-638 6,000
Tensile Modulus (psi) D-638 340,000
Tensile Elongation at Break (%) D-638 25
Hardness (Rockwell R) D-785 R105
Compressive Strength (psi) D-695 -
Compressive Modulus (psi) D-695 -
Flexural Strength (psi) D-790 11,000
Flexural Modulus (psi) D-790 320,000
Thermal Conductivity (BTU-in/ft²-hr-°F) C-177 -
(x 104 cal/cm-sec-°C) -
Heat Deflection Temp at 264 psi (°F / °C) D-648 215 / 102
Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) D-696 5.3
Flammability Rating   UL-94 H-B
Melting Temperature (°F / °C) D-3418 - / -
Max Operating Temp (°F / °C) - 140 / 60
Dialectric Strength, 1/8" thick (V/mil) D-149 -
Dialectric Constant at 60 Hz   D-150 -
Dissipation Factor at 60 Hz   D-150 -
Volume Resistivity at 50% RH (ohm-cm) D-257 1015
Physical Mechanical Thermal Electrical