11125 I-10 East
Orange, TX 77630
1-800-351-0026

409-745-2002
fax: 409-745-4277
Se Habla Español

An ISO 9001 Certified Company

HALAR® 901 (Ethylene-Chlorotriflouroethelyne)

Made from HALAR® ethylene-chlorotrifluoroethylene resin, these products are virtually unaffected by most common corrosive chemicals. ECTFE products have excellent chemical and mechanical properties, impact strength, and a broad service use temperature. This polymer offers extremely low permeability to liquids, gases, and vapors.

Typical Applications:
Halar® 901 Properties
Property ASTM or UL Test Halar® ETCFE
Water Absorption (24hrs) (%) D-570 <0.1
Density (lb/in³) D-792 0.061
(g/cm³) 1.68
IZOD Notched Impact (ft-lb/in) D-256 No Break
Tensile Strength (psi) D-638 7,000
Tensile Modulus (psi) D-638 240,000
Tensile Elongation at Break (%) D-638 250
Hardness (Shore D) D-2240 D75
Compressive Strength (psi) D-695 -
Compressive Modulus (psi) D-695 -
Flexural Strength (psi) D-790 6,800
Flexural Modulus (psi) D-790 245,000
Thermal Conductivity (BTU-in/ft²-hr-°F) C-177 1.09
(x 104 cal/cm-sec-°C) 3.75
Heat Deflection Temp at 264 psi (°F / °C) D-648 145 / 63
Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) D-696 5.6
Flammability Rating   UL-94 V-0
Melting Temperature (°F / °C) D-3418 464 / 240
Max Operating Temp (°F / °C) - 300 / 149
Dialectric Strength, 1/8" thick (V/mil) D-149 500
Dialectric Constant at 1 kHz   D-150 25
Dissipation Factor at 1 kHz   D-150 0.0016
Volume Resistivity at 50% RH (ohm-cm) D-257 1015
Physical Mechanical Thermal Electrical